RG-S6120-20XS4VS2QXS 24-Port 10GE Layer 3 Managed Core and Aggregation Switch (with Four 25G SFP28 Ports, Backward Compatible with 10G), 40G Uplink
A Red Dot Design Award winner. Recommended core or aggregation switch for small and medium-sized enterprise deployment.
Model
Dòng
Tính năng nổi bật
- Rich port types, 20 x 10G SFP+ ports,4 x 25G SFP28 ports, and 2 x 40G QSFP+ ports for uplink
- VSU virtualization, flexible networking and high performance
- Hardware redundancy, guaranteed service continuity and network connectivity
- Network security policies and real-time monitoring, delivering enhanced network robustness
- Abundant QoS policies for flexible resource allocation, congestion is a thing of the past
- Multiple management modes, simple and easy maintenance
Thông số chi tiết chính
Layer 3 All-Optical 10GE Core & Aggregation Switch
RG-S6120-20XS4VS2QXS
Recommended aggregation switch for large-sized networks, or core switch for small and medium-sized networks. With 20 x 10G SFP+ ports and 4 x 25G SFP28 ports, the switch provides flexible access capabilities. The 2 x 40G QSFP+ uplink ports deliver high-speed uplink connectivity, fully satisfying the requirements of
high-performance networks.
VSU Virtualization, Flexible Networking and High Performance
Millisecond Failover
High Scalability
Simplified Networking
Hardware Redundancy, Guaranteed Service Continuity
and Network Connectivity
Hot-Swappable Power Modules + Intelligent Fan Modules
Hardware-Level Boot Redundancy
Optical Port Fault Isolation
providing dual protection for the network.
Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness
CPP
NFPP
Abundant QoS Policies for Flexible Resource Allocation,
Making Congestion a Thing of the Past
With multi-plane flow classification and control capabilities for MAC flow, IP flow and application flow, accurate resource allocation for multi-service traffic makes congestion a thing of the past, delivering high-quality networks.
Managed by the INC Controller to Achieve Easy and Efficient O&M Management
configuration after it accesses the all-optical network, achieving
plug and play, no commissioning and fast onboarding.
without reconfiguration. Service ports supports auto-sensing,
achieving automatic O&M.
Fast Onboarding
Zero Touch Replacement
FAQ
Tài liệu
Ruijie RG-S6120-20XS4VS2QXS Switch Datasheet
Ruijie RG-S6120 Series Switches RGOS 12.4(1)B0102 Configuration Guide(V1.0)
Ruijie RG-S6120 Series Switches RGOS 12.4(1)B0102 Command Reference(V1.1)
Ruijie RG-S6120 Series Switches Hardware Installation and Reference Guide (V1.06)
Ruijie RG-S6120 Series Switches Web-based Configuration Guide, 12.6(2)B1302 (V2.0)
Ruijie RG-S6120 Series Switches RGOS 12.6(2)B1302 Command Reference (V1.1)
Ruijie RG-S6120 Series Switches RGOS 12.6(2)B1302 Configuration Guide (V1.1)
Specifications
| Model |
RG-S6120-20XS4VS2QXS |
|
|---|---|---|
| Basic specifications |
||
| Fixed ports |
20 x 1G/2.5G/10GBASE-X SFP+ ports* 4 x 10G/25GBASE-X SFP28 ports, 2 x 40GBASE-X QSFP+ ports, Support up to 32 x 10G ports, 2 modular power slots, 2 modular fan slots |
|
| Management ports |
1 MGMT port 1 console port |
|
| Switching capacity |
2.56Tbps/25.6T |
|
| Forwarding rate |
570Mpps/1260Mpps |
|
| ARP Table |
Up to 16K |
|
| Number of MAC addresses |
Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000 |
|
| Routing Table Size |
16K/16K |
|
| ACL Entries |
Up to 2500 |
|
| Product Features |
||
| VLAN |
4K 802.1Q VLAN Port-based VLAN Private VLAN GVRP Super VLAN |
|
| QinQ |
Basic QinQ |
|
| Link aggregation |
LACP (802.3ad) |
|
| Port mirroring |
Flow-based mirroring Many-to-one mirroring, One-to-many mirroring RSPAN Link aggregation mirroring |
|
| Multiple Spanning Tree (MST) Instances |
64 |
|
| Spanning tree protocols |
STP, RSTP, MSTP |
|
| Maximum Aggregation Port (AP) |
128 |
|
| DHCP |
DHCP Server DHCP Client DHCP Snooping DHCP Relay IPv6 DHCP Snooping IPv6 DHCP Client IPv6 DHCP Relay |
|
| IPv6 protocols |
IPv6 addressing, ICMPv6, Path MTU Discovery |
|
| IP routing |
Static routing RIP, RIPng OSPFv2, OSPFv3, IS-ISv4, IS-ISv6 BGP4, BGP4+ Policy Based Routing ECMP |
|
| Multicast |
IGMP v1/v2/v3, IGMP proxy IGMP v1/v2/v3 snooping IGMP filtering, IGMP fast leave PIM-DM, PIM-SM, PIM-SSM MLD Snooping, MLD MSDP |
|
| ACL & QoS |
ACL |
Various hardware-based ACLs: Standard IP ACL (Based on IP address) Extended IP ACL (Based on IP address and TCP/UDP port number) Extended MAC ACL (Based on source and destination MAC addresses and Ethernet type) Time-based ACL Expert ACL (Based on the flexible combination of VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port, protocol type and time) ACL80 IPv6 ACL |
| QoS |
Port-based traffic recognition Port-based speed limit 802.1p/DSCP/TOS traffic classification 8 priority queues per port Queue scheduling algorithms: SP, WRR, DRR, SP+WRR, SP+DRR, RED/WRED |
|
| Security |
Filter unauthorized MAC addresses Broadcast storm suppression Hierarchical management by administrators and password protection RADIUS and TACACS+ SSH BPDU Guard CPP, NFPP |
|
| Management |
SNMP, CLI (Telnet/Console), RMON (1,2,4,9), Syslog, NTP, SNMP over IPv6, IPv6 MIB support for SNMP, Telnet v6, FTP/TFTP v6, DNS v6, NTP for v6, Traceroute v6 Support sFlow to sample the packets of the switch traffic using the random sampling technology of data stream |
|
| Reliability |
VSU (virtualization technology for virtualizing multiple devices into 1); GR for RIP/OSPF/BGP; BFD; G.8032 (ERPS), REUP; RLDP; 1+1 power redundancy; Hot-swappable power module and fan module |
|
| VSU (Virtual Switch Unit) |
Up to 2 stack members |
|
| Physical Specifications |
||
| Power supply |
Supported power module: RG-PA150I-F AC input: 100 to 240VAC; 50/60Hz Maximum voltage range: 90 to 264VAC; 47/63Hz HVDC input: Maximum voltage range: 192 to 288 VDC Rated current per input: 3A |
|
| Power Consumption |
<85W |
|
| Power Surge Protection |
4KV (MGMT Port) Power Supply Module (RG-PA150I-F): common mode 6KV/difference mode 6KV |
|
| Fan |
Support 2 pluggable modular fans with front and rear air ducts Support fan speed adjustment and malfunction alert |
|
| Temperature alarm |
Support temperature alarm function |
|
| Temperature |
Operating temperature: 0°C to 50°C Storage temperature: -40°C to 70°C |
|
| Humidity |
Operating humidity: 10% to 90%RH Storage humidity: 5% to 90%RH |
|
| Operating Altitude |
0 to 5,000m |
|
| Dimensions (W x D x H) (mm) |
440 * 330 * 43.6（W * D * H，mm） |
|
| Rack Height |
1RU |
|
| MTBF |
30 Years |
|
| Safety Standards |
GB4943-2011 EN 62368-1:2014+A11:2017 |
|
| Emission Standards |
GB9254-2008 CLASSA EN 55032:2015+AC:2016 EN 61000-3-2:2014 EN 61000-3-3:2013+A1:2019 EN 55035:2017 ETSI EN 300 386 V2.1.1 (2016-07) |
|
Order Information
Please order according to the below sections including switch models, expansion modules and power modules selection. The expansion modules and power modules may be updated at any time. Please consult the related personnel before ordering.
| Model |
Description |
| RG-S6120-20XS4VS2QXS |
20 1G/10GBASE-X SFP+ ports, 4 10G/25GBASE-X SFP28 Ports, 2 40GBASE-X QSFP+ ports, support up to 32 10G ports, 2 modular power supply slots (at least one RG-PA150I-F power module), 2 modular fan slots (2 fan modules are equipped by default) |
| RG-PA150I-F |
150W AC power module for RG-S6120-20XS4VS2QXS |
| Mini-GBIC-GT |
1000BASE-GT mini GBIC transceiver |
| XG-SFP-SR-MM850 |
10G LC interface module for SFP+ ports (62.5/125μm: 33m; 50/125μm: 66m; 300m when the modal bandwidth is 2000MHz•km) |
| XG-SFP-LR-SM1310 |
10G LC interface module for SFP+ ports (1310nm, 10km) |
| XG-SFP-ER-SM1550 |
10G LC interface module for SFP+ ports (1550nm, 40km) |
| VG-SFP-SR-MM850 |
25G fiber module VG-SFP-SR-MM850 |
| VG-SFP-LR-SM1310 |
25G fiber module VG-SFP-LR-SM1310 |
| XG-SFP-AOC1M |
10G SFP+ optical cable, 1 meter, including one cable + both side transceivers |
| XG-SFP-AOC3M |
10G SFP+ optical cable, 3 meters, including one cable + both side transceivers |
| XG-SFP-AOC5M |
10G SFP+ optical cable, 5 meters, including one cable + both side transceivers |
| VG-SFP-AOC5M |
25G SFP+ optical cable (including both side transceivers), 5 meters |
| 40G-QSFP-SR-MM850 |
40G SR fiber module for QSFP+ ports (OM3/OM4 MPO, 8-core, 850nm, 100m with OM3 fiber, 150m with OM4 fiber) |
| 40G-QSFP-LR4 SM1310 |
40G LR single-mode fiber module for QSFP+ ports, transmission distance up to 10km (LC, 2-core, 1310nm) |
| 40G-AOC-5M |
40G QSFP+ optical cable, 5 meters, including one cable + both side transceivers |
| 40G-AOC-10M |
40G QSFP+ optical cable, 10 meters, including one cable + both side transceivers |
