Hình ảnh

RG-S6510-4C 100GE Data Center Access Switch

M-LAG/VSU/de-stacking for higher availability, PFC/ECN-based lossless RDMA network with high performance

Model

Dòng

Tính năng nổi bật

96 x 25GE ports and 8 x 100GE ports, 32 x 100GE ports, or 64 x 40GE ports housed in a 2 RU enclosure for flexible networking
Cross-device link aggregation (De-stacking/M-LAG/VSU), device-level redundancy, flexible networking, and high reliability
VXLAN tunneling technology, achieving unlimited data transmission and flexible resource allocation and scheduling
Lossless Ethernet, ensuring zero packet loss during RDMA E2E communication
Telemetry/gRPC/sFlow/SPAN-based network monitoring and automated O&M, making management simple and efficient

Tổng quan
Tài liệu
Specifications
Order Information

Thông số chi tiết chính

Data Center 100GE Access Switch RG-S6510-4C

100GE high-density modular access switch with 10G/25G/40G/100GE downlink ports
96 x 25GE ports and 8 x 100GE ports, 32 x 100GE ports, or 64 x 40GE ports housed in a 2 RU enclosure for adaptation to different scenarios

Cross-device Link Aggregation, Implementing Device-level Redundancy, Flexible Networking, and High Reliability

De-stacking

M-LAG

VSU

De-stacking technology logically aggregates multiple switches through LACP to allow servers on the same network segment or on different network segments to communicate. This eliminates the need to synchronize data between switches, without affecting service transmission.

VXLAN Tunneling Technology, Achieving Unlimited Data Transmission and Flexible Resource Allocation and Scheduling

VXLAN technology creates virtual tunnels on an IP network by building a virtual Layer 2 network, implementing cross-region and cross-DC data migration, and flexible resource allocation and scheduling. The switch supports EVPN VXLAN to enhance the number of tenants, meeting requirements of identification and isolation between different networks on a large scale.

PFC- and ECN-based Lossless Ethernet with High Throughput and Low Latency in RDMA Scenarios

With RDMA technology, data does not need to be handled by the CPU during device communication. This reduces the CPU burden
and effectively solves the network latency problem.
PFC+ECN, intelligent data exchange, and packet loss prevention, ensuring lossless data transmission

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time, making network management more efficient and accurate.

Tài liệu

Ruijie RG-S6500&S6250 Series Switches RGOS Configuration Guide, Release 11.0(5)B9P62S1

Ruijie RG-S6500&S6250 Series Switches RGOS Command Reference, Release 11.0(5)B9P62S1

[Product Datasheet] RG-S6510-4C Data Center Switch Datasheet

RG-S6500 Series Switch Command Reference, Release RGOS 12.5(1)B0503 (V1.0)

RG-S6500 Series Switch Configuration Guide, Release RGOS 12.5(1)B0503 (V1.0)

Specifications

Hardware Specifications

System Specifications	RG-S6510-4C
Ports	25GE, 40GE, and 100GE ports
Slots	4
Expansion Modules	M6500-24VS2CQ, M6500-08CQ, M6500-16QXS
Expansion Module Slots	Power supply module slots Fan module slots
Management Port	One management port, one console port, and one USB port, compliant with the USB2.0 standard
Switching Capacity	6.4 Tbps
Packet Forwarding Rate	2030 Mpps
802.1Q VLAN	4094
Dimensions and Weight	RG-S6510-4C
Dimensions (W × D × H)	442 mm × 520 mm × 86 mm (2 RU)
Weight	About 19 kg (including power supply modules and fan modules)
Power Supply and Consumption	RG-S6510-4C
AC	Rated voltage range: 100 VAC to 240 VAC, 50 Hz to 60 Hz Maximum voltage range: 90 VAC to 264 VAC, 50 Hz to 60 Hz Rated input current: 5 A to 10 A
High-voltage DC	Input voltage range: 192 VDC to 288 VDC Input current range: < 4.5 A
Maximum Power Consumption	< 650 W
Environment and Reliability	RG-S6510-4C
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% RH (Non-condensing)

Software Specifications

Software Specifications	RG-S6510-4C
L2 Protocols	IEEE802.3ad (Link Aggregation Control Protocol), IEEE802.1p, IEEE802.1Q, IEEE802.1D (STP), IEEE802.1w (RSTP), IEEE802.1s (MSTP), IGMP Snooping, MLD Snooping, Jumbo Frame (9 KB), IEEE802.1ad (QinQ and selective QinQ), GVRP
L3 Protocols (IPv4)	BGP4, OSPFv2, RIPv1, RIPv2, MBGP, LPM Routing, Policy-based Routing (PBR), Route-policy, Equal-Cost Multi-Path Routing (ECMP), WCMP, VRRP, IGMP v1/v2/v3, PIM-SSM/SM/DM, MSDP, Any-RP
IPv6 Basic Protocols	Neighbor Discovery, ICMPv6, Path MTU Discovery, DNSv6, DHCPv6, ICMPv6, ICMPv6 redirection, ACLv6, TCP/UDP for IPv6, SNMP v6, Ping/Traceroute v6, IPv6 RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS
IPv6 Features	Static routing, ECMP, PBR, OSPFv3, RIPng, BGP4+, MLDv1/v2, PIM-SMv6, manual tunnel, automatic tunnel, IPv4 over IPv6 tunnel, and ISATAP tunnel
Data Center Features	VXLAN routing and VXLAN bridging EVPN VXLAN IPv6 VXLAN over IPv4 PFC, ECN, and other data center features RDMA M-LAG OpenFlow 1.3
Visualization	gRPC sFLOW sampling INT
QoS	Mapping of IEEE 802.1p, DSCP, and ToS priorities ACL-based traffic classification Priority marking/remarking Multiple queue scheduling mechanisms, including SP, WRR, DRR, SP+WRR, and SP+DRR Congestion avoidance mechanisms such as WRED and tail discarding
Virtualization	Virtual Switching Unit
Cache Management	Cache status monitoring and management, and identification of burst traffic
HA Design	GR for RIP/OSPF/BGP, BFD, REUP dual-link fast switching and RLDP unidirectional link detection, 1+1 power redundancy, and fan redundancy, and hot swapping for all cards and power supply modules
Security Features	Network Foundation Protection Policy (NFPP), CPP, DDoS attack defense, illegitimate data packet detection, data encryption, source IP spoofing prevention, IP scanning prevention, RADIUS/TACACS, IPv4/v6 packet filtering by basic ACL, extended ACL or VLAN-based ACL, plaintext-based and MD5 ciphertext-based authentication for OSPF, RIPv2, and BGPv4 packets, telnet login and password mechanisms for restricted IP addresses, uRPF, broadcast packet suppression, DHCP Snooping, gateway ARP spoofing prevention, and ARP check
Management Mode	SNMP v1/v2/v3, Netconf, telnet, console, MGMT, RMON, SSHv1/v2, FTP/TFTP, NTP clock, Syslog, SPAN/RSPAN, Telemetry, ZTP, Python, fan and power supply alarm, and temperature alarm
Other Protocols	DHCP Client, DHCP Relay, DHCP Server, DNS Client, UDP relay, ARP Proxy, and Syslog

Order Information

The configuration procedure for RG-S6510-4C series switches is as follows:

● Select the switch, fan, and power supply modules.

● Select expansionmodules based on port

● Select optical transceivers.

Chassis, Fan, and Power Supply Modules

Product Model	Description
RG-S6510-4C	Four expansion module slots, supporting hot swapping. Two power supply module slots and three fan module slots The power supply model is RG-PA800I-F, and the fan model is M6500-FAN-F.
RG-PA800I-F	Power supply module, supporting 1+1 redundancy, hot swapping, and front-to-rear ventilation design
M6500-FAN-F	Fan module, supporting 2+1 redundancy, hot swapping, and front-to-rear ventilation design

Expansion Modules

Product Model	Description
M6500-08CQ	Eight QSFP28 ports The QSFP28 port supports a speed of 40 Gbps/100 Gbps.
M6500-24VS2CQ	24 25GE SFP28 ports and two QSFP28 ports SFP28 supports a speed of 10G/25G rates. The QSFP28 port supports a speed of 40 Gbps/100 Gbps. One QSFP port can be split into four 10GE or 25GE ports.
M6500-16QXS	16 QSFP ports The QSFP28 port supports a speed of 40 Gbps.

100GE Optical Transceivers

Product Model	Description
100G-QSFP-SR-MM850	100GE SR optical transceiver, QSFP28 package, MPO connector (850 nm wavelength) The transmission distance is 100 m when OM4 optical fibers are used.
100G-QSFP-LR4-SM1310	100GE LR single-mode optical transceiver, QSFP28 package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 10 km
100G-QSFP-iLR4-SM1310	100GE iLR optical transceiver, QSFP28 package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 2 km

40GE and 10GE Optical Transceivers

Product Model	Description
40G-QSFP-SR-MM850	40GE SR optical transceiver, QSFP+ package, MPO connector (used in combination with OM3/OM4 MPO optical fibers, 8-core/12-core, 850 nm wavelength) The transmission distance is 100 m when OM3 optical fibers are used and 150 m when OM4 optical fibers are used.
40G-QSFP-LR4-SM1310	40GE LR optical transceivers, QSFP+ package, LC connector (used in combination with LC optical fibers, 2-core, 1310 nm wavelength), maximum transmission distance of 10 km
40G-QSFP-LSR-MM850	40GE SR optical transceivers, QSFP+ package, MPO connector (used in combination with OM3/OM4 MPO optical fibers, 8-core/12-core, 850 nm wavelength) The transmission distance is 300 m when OM3 optical fibers are used and 400 m when OM4 optical fibers are used. The port can be split into four ports to support the 10GE SFP+ transceiver.

25GE Optical Transceivers

Product Model	Description
VG-SFP-SR-SM850	25GE SR optical transceiver, SFP28 package, LC connector, and 850 nm wavelength The transmission distance is 100 m when OM4 optical fibers are used and 70 m when OM3 optical fibers are used.
VG-SFP-LR-SM1310	25GE LR optical transceiver, SFP28 package, LC connector, and 1310 nm wavelength The transmission distance is 10 km when single-mode fibers are used.

RG-S6510-4C 100GE Data Center Access Switch

Thông số chi tiết chính

Data Center 100GE Access Switch RG-S6510-4C

100GE high-density modular access switch with 10G/25G/40G/100GE downlink ports96 x 25GE ports and 8 x 100GE ports, 32 x 100GE ports, or 64 x 40GE ports housed in a 2 RU enclosure for adaptation to different scenarios

Cross-device Link Aggregation, Implementing Device-level Redundancy, Flexible Networking, and High Reliability

De-stacking

M-LAG

VSU

VXLAN Tunneling Technology, Achieving Unlimited Data Transmission and Flexible Resource Allocation and Scheduling

PFC- and ECN-based Lossless Ethernet with High Throughput and Low Latency in RDMA Scenarios

With RDMA technology, data does not need to be handled by the CPU during device communication. This reduces the CPU burden and effectively solves the network latency problem.PFC+ECN, intelligent data exchange, and packet loss prevention, ensuring lossless data transmission

Telemetry-based Network Monitoring and Automated O&M,Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time, making network management more efficient and accurate.

Tài liệu

Ruijie RG-S6500&S6250 Series Switches RGOS Configuration Guide, Release 11.0(5)B9P62S1

Ruijie RG-S6500&S6250 Series Switches RGOS Configuration Guide, Release 11.0(5)B9P62S1

Ruijie RG-S6500&S6250 Series Switches RGOS Command Reference, Release 11.0(5)B9P62S1

[Product Datasheet] RG-S6510-4C Data Center Switch Datasheet

RG-S6500 Series Switch Command Reference, Release RGOS 12.5(1)B0503 (V1.0)

RG-S6500 Series Switch Configuration Guide, Release RGOS 12.5(1)B0503 (V1.0)

Specifications

Hardware Specifications

Software Specifications

Order Information

Chassis, Fan, and Power Supply Modules

Expansion Modules

100GE Optical Transceivers

40GE and 10GE Optical Transceivers

25GE Optical Transceivers

100GE high-density modular access switch with 10G/25G/40G/100GE downlink ports
96 x 25GE ports and 8 x 100GE ports, 32 x 100GE ports, or 64 x 40GE ports housed in a 2 RU enclosure for adaptation to different scenarios

With RDMA technology, data does not need to be handled by the CPU during device communication. This reduces the CPU burden
and effectively solves the network latency problem.
PFC+ECN, intelligent data exchange, and packet loss prevention, ensuring lossless data transmission

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time, making network management more efficient and accurate.