Thông số chi tiết chính View More

Features

Modular Core Switch RG-S7810C

Compact chassis design with a height of 10 RU improves cabinet space utilization.
Eight line card slots support a wide range of cards that provide various port types, including 1GE, 10GE, and 40GE ports, catering to the diverse needs of small, medium, and large-scale campus deployments.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

CPU Protection Policy (CPP) controls the types and traffic of packets sent to the CPU, preventing CPU usage exceptions.

VSU, Delivering Flexible Networking Capabilities and High Performance

VSU technology virtualizes multiple physical switches into one logical unit with a single IP address to realize unified management, simplifying O&M.
Fast link failover within 50 to 200 milliseconds ensures nonstop transmission of critical services.

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

1+1 Switch Fabric Module Redundancy

Two switch fabric modules are supported to realize load balancing and redundancy across planes, which ensures uninterrupted service data transmission.

Dual-Boot Redundancy

Two flash chips for storing boot software achieve hardware-level boot redundancy, avoiding switch boot failures due to a flash chip fault.

1+1 Supervisor module Redundancy

1+1 hot standby ensures nonstop switch services.

N+M Power Supply Redundancy

Four hot-swappable power supplies realize failover within seconds and service continuity during power replacement, ensuring link reliability.

1+1 Fan Module Redundancy

Two axial flow fans for factory delivery support 256-level speed regulation and precise temperature control, reducing energy consumption and noise.

SOE Management Software INC Offers Easy and Efficient O&M

Automatic device registration and configuration after device connection, plug and play without commissioning, fast provisioning

Flexible replacement with no need form a bridge reconfiguration Auto-sensing on ports, facilitating automatic O&M

Intelligent identification and classification of terminals together with one-click access control and approvals Three-minute quick and auto onboarding

Zero-touch provisioning and plug and play

Access control as well as quick onboarding

Zero-touch replacement and auto-sensing on ports

Specifications

Hardware Specifications (with -CM Series Supervisor Module)

Port specifications	RG-S7805C	RG-S7808C	RG-S7810C
Module slot	2 x supervisor module slots 3 x line card slots 2 x power module slots 1 x fan module slot	2 x supervisor module slots 6 x line card slots 4 x power module slots 2 x fan module slots	2 x supervisor module slots 8 x line card slots (slot 7 does not support the EB line card) 2 x switch fabric module slots 4 x power module slots 2 x fan module slots
Supervisor module	M7805C-CM II	M7808C-CM II	M7810C-CM M7810C-CM-F
Switch fabric module	/	M7808C-CM II (switch fabric module integrated with supervisor module)	M7810C-FE-D I (must be used with M7810C-CM) M7810C-FE-F I (must be used with M7810C-CM-F) M7810C-CM, M7810C-CM-F (switch fabric module integrated with supervisor module)
line card	M7805C-CM II supports the following 9 modules: ● M7800C-32XS4QXS-DA ● M7800C-24GT24SFP4XS-EB ● M7800C-24SFP/12GT4XS-EB ● M7800C-48GT4XS-EB ● M7800C-48SFP4XS-EB ● M7800C-48GT-FA ● M7800C-48SFP-FA ● M7800C-48XS-FB ● M7800C-8CQ-FB *1	M7808C-CM II supports the following 9 modules: ● M7800C-32XS4QXS-DA ● M7800C-24GT24SFP4XS-EB ● M7800C-24SFP/12GT4XS-EB ● M7800C-48GT4XS-EB ● M7800C-48SFP4XS-EB ● M7800C-48GT-FA ● M7800C-48SFP-FA ● M7800C-48XS-FB ● M7800C-8CQ-FB *1	M7810C-CM supports the following 5 modules: ● M7800C-32XS4QXS-DA ● M7800C-24GT24SFP4XS-EB ● M7800C-24SFP/12GT4XS-EB ● M7800C-48GT4XS-EB ● M7800C-48SFP4XS-EB M7810C-CM-F supports the following 4 modules: ● M7800C-48GT-FA ● M7800C-48SFP-FA ● M7800C-48XS-FB ● M7800C-8CQ-FB *1
Power module	RG-PA300I-F RG-PA460I-F RG-PA1000I-F	RG-PA600I-F RG-PA1600I-F	RG-PA600I RG-PA1600I
Fan module	M05C-FAN (pre-installed 1)	M08-FAN (pre-installed 2)	M10C-FAN (pre-installed 2)
Module management port	M7805C-CM II: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port	M7808C-CM II: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port	M7810C-CM: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port M7810C-CM-F: ● 1 x RJ45 console port 2 ● 1 x mini USB console port 2 ● 1 x RJ45 MGMT port
USB	M7805C-CM II: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)	M7808C-CM II: 2 x USB 2.0 ports (no capacity limit, 2G/4G/8G/16G/32G capacity tested)	M7810C-CM: 1 x USB 2.0 port M7810C-CM-F: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)

*1 Note: FA/FB series cannot be used with EB series or DA series.

*2 Note: Only one console port is allowed to be used at the same time. The mini USB console port has a higher priority.

System specifications	RG-S7805C	RG-S7808C	RG-S7810C
System packet forwarding rate *3	4500 Mpps	9000 Mpps	12000 Mpps
System switching capacity *4	6000 Gbps	12000 Gbps	16000 Gbps
CPU	Supervisor module: ● M7805C-CM II: quad-core CPU, each core with the clock speed of 1.0 GHz Line card ● EB card: quad-core CPU, each core with the clock speed of 1.0 GHz ● DA/FA/FB card: quad-core CPU, each core with the clock speed of 1.5 GHz	Supervisor module: ● M7808C-CM II: quad-core CPU, each core with the clock speed of 1.5 GHz Line card ● EB card: quad-core CPU, each core with the clock speed of 1.0 GHz ● DA/FA/FB card: quad-core CPU, each core with the clock speed of 1.5 GHz	Supervisor module: ● M7810C-CM, M7810C-CM-F: quad-core CPU, each core with the clock speed of 1.5 GHz Line card ● EB card: quad-core CPU, each core with the clock speed of 1.0 GHz ● DA/FA/FB card: quad-core CPU, each core with the clock speed of 1.5 GHz Switch fabric module ● M7810C-FE-D I, M7810C-FE-F I: quad-core CPU, each core with the clock speed of 1.5 GHz
Real-time clock (RTC)	M7805C-CM II: supported	M7808C-CM II: supported	M7810C-CM/M7810C-CM-F: supported
BootROM	M7805C-CM II：8 MB EB card: 8 MB DA/FA/FB card: 16 MB	M7808C-CM II: 16 MB EB card: 8 MB DA/FA/FB card: 16 MB	M7810C-CM/M7810C-CM-F: 16 MB EB card: 8 MB DA/FA/FB card: 16 MB M7810C-FE-D I/M7810C-FE-F I: 16 MB
Flash memory	M7805C-CM II: 1 GB EB card: 512 MB DA/FA/FB card: 8 GB	M7808C-CM II: 8 GB EB card: 512 MB DA/FA/FB card: 8 GB	M7810C-CM/M7810C-CM-F: 8 GB EB card: 512 MB DA/FA/FB card: 8 GB M7810C-FE-D I/M7810C-FE-F I: 8 GB
Memory	M7805C-CM II: 4 GB DDR3 EB card: 1 GB DDR3 DA card: 1 GB DDR4 FA/FB card: 2 GB DDR4	M7808C-CM II: 4 GB DDR4 EB card: 1 GB DDR3 DA card: 1 GB DDR4 FA/FB card: 2 GB DDR4	M7810C-CM/M7810C-CM-F: 4 GB DDR4 EB card: 1 GB DDR3 DA card: 1 GB DDR4 FA/FB card: 2 GB DDR4 M7810C-FE-D I: 1 GB DDR4 M7810C-FE-F I: 2 GB DDR4
Switch buffer	EB: 4 MB FB: 32 MB FA: 8 MB DA: 16 MB	EB: 4 MB FB: 32 MB FA: 8 MB DA: 16 MB	EB: 4 MB FB: 32 MB FA: 8 MB DA: 16 MB

*3 means the system's packet forwarding rate.

*4 means the system's switching capacity.

Power supply and consumption	RG-S7805C	RG-S7808C	RG-S7810C
Power supply	2 x pluggable power modules	4 x pluggable power modules	4 x pluggable power modules
Power input	RG-PA300I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 5 A RG-PA460I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 290 V AC; 45 Hz to 63 Hz ● Maximum input current: 6 A RG-PA1000I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 10 A	RG-PA600I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 10 A RG-PA1600I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 16 A	RG-PA600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 16 A
Maximum output power	RG-PA300I-F: 300 W RG-PA460I-F: 460 W RG-PA1000I-F: ● 100 V AC to 176 V AC: 800 W ● 176 V AC to 240 V AC: 1000 W	RG-PA600I-F: 600 W RG-PA1600I-F: ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W	RG-PA600I: 600 W RG-PA1600I: ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W
Module power consumption	M05C-FAN: < 80 W M7805C-CM II: < 21 W	M08-FAN: < 88 W M7808C-CM II: < 50 W	M10C-FAN: < 216 W M7810C-CM: < 50 W M7810C-CM-F: < 110 W
Module power consumption	M7800C-32XS4QXS-DA: < 210 W M7800C-24GT24SFP4XS-EB: < 88 W M7800C-24SFP/12GT4XS-EB: < 85 W M7800C-48GT4XS-EB: < 70 W M7800C-48SFP4XS-EB: < 101 W M7800C-48GT-FA: < 75 W M7800C-48SFP-FA: < 95 W M7800C-48XS-FB: < 160 W M7800C-8CQ-FB: < 130 W

Dimensions and Weight	RG-S7805C	RG-S7808C	RG-S7810C
Unit dimensions (W x D x H)	442 mm x 451 mm x 175 mm (17.40 in. x 17.76 in. x 6.89 in.)	442.0 mm x 465.0 mm x 441.7 mm (17.40 in. x 18.31 in. x 17.39 in.)	442.5 mm x 560.0 mm x 442.0 mm (17.42 in. x 22.05 in. x 17.40 in.)
Shipping dimensions (W x D x H)	750.0 mm x 600.0 mm x 455.0 mm (29.53 in. x 23.62 in. x 17.91 in.)	710.0 mm x 590.0 mm x 735.0 mm (27.95 in. x 23.23 in. x 28.94 in.)	845.0 mm x 685.0 mm x 770.0 mm (33.27 in. x 26.97 in. x 30.31 in.)
Rack height	4 RU	10 RU	10 RU
Unit weight	12.42 kg (27.38 lbs, empty chassis with 1 fan module)	35.60 kg (78.48 lbs, empty chassis with 2 fan modules)	43.60 kg (96.01 lbs, empty chassis with 2 fan modules)
Shipping weight	28.05 kg (61.84 lbs)	43.93 kg (96.85 lbs)	68.30 kg (150.58 lbs)

Environment and reliability	RG-S7805C	RG-S7808C	RG-S7810C
Temperature	Operating temperature: 0°C to 50°C (32°F to 122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Mean time between failure (MTBF)	216,000 hours (about 24 years)	216,000 hours (about 24 years)	342,000 hours (about 39 years)
Fan	1 x pluggable fan module (pre-installed)	2 x pluggable fan modules (pre-installed)	2 x pluggable fan modules (pre-installed)
Heat dissipation	Supervisor module: right-to-left airflow Line card: right-to-rear airflow Power module: built-in fan modules drawing air outward, front-to-rear airflow	Supervisor module: right-to-rear airflow Line card: right-to-rear airflow Power module: front-to-rear airflow	Supervisor module: front-to-rear airflow Line card: side-to-rear airflow FE card: front-to-rear airflow
Acoustic noise	27°C (80.6°F): 70 dB Max Noise: 77 dB	27°C (80.6°F): 70 dB Max Noise: 77 dB	27°C (80.6°F): 70 dB Max Noise: 77 dB
Supervisor module redundancy	1+1 redundancy	1+1 redundancy	1+1 redundancy (same model)
Power module redundancy	1+1 redundancy (same model)	N+M redundancy (same model)	N+M redundancy (same model)
Fan redundancy	Not supported	1+1 redundancy	1+1 redundancy
Module hot swapping	Supported	Supported	Supported
Power module hot swapping	Supported	Supported	Supported
Fan module hot swapping	Supported	Supported	Supported
Cable hot swapping	All ports on line cards support hot swapping of cables. The switch-mode power supply supports hot swapping of power cords.
Power supply monitoring	Monitoring of the model, temperature, power, and voltage of the power supply module Power supply failure alarming Control of line card power-on based on the power supply status
Fan monitoring	Fan speed adjustment: 256 levels Fan failure alarming
Temperature monitoring	Over-temperature alarming
ESD	ESD contact/air discharge: 6 kV/8 kV ESD susceptibility contact/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 4 kV Power port: 6 kV

Certifications and regulatory compliance	RG-S7805C	RG-S7808C	RG-S7810C
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
RoHS	European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Hardware Specifications (with -X Series Supervisor Module)

Port specifications	RG-S7805C	RG-S7808C	RG-S7810C-X
Module slot	2 x supervisor module slots 3 x line card slots 2 x power module slots 1 x fan module slot	2 x supervisor module slots 6 x line card slots 4 x power module slots 2 x fan module slots	2 x supervisor module slots 8 x line card slots 4 x switch fabric module slots 4 x power module slots 2 x fan module slots
Supervisor module	M7805C-CM-X	M7808C-CM-X	M7810C-CM-X
Switch fabric module	/	M7808C-CM-X (switch fabric module integrated with supervisor module)	M7810C-FE-X I M7810C-FE-X II
line card	M7800C-48GT4XS-XA M7800C-48SFP4XS-XA M7800C-24GT8SFP8XS-XA M7800C-32XS-XA M7800C-52XS-XB M7800C-12CQ-XB M7800C-48XT-P-XB	M7800C-48GT4XS-XA M7800C-48SFP4XS-XA M7800C-24GT8SFP8XS-XA M7800C-32XS-XA M7800C-52XS-XB M7800C-12CQ-XB M7800C-48XT-P-XB M7800C-8SFG-XB M7800C-8SFX-XB	M7800C-48GT4XS-XA M7800C-48SFP4XS-XA M7800C-24GT8SFP8XS-XA M7800C-32XS-XA M7800C-52XS-XB M7800C-12CQ-XB M7800C-48XT-P-XB M7800C-8SFG-XB M7800C-8SFX-XB
Power module	RG-PA300I-F RG-PA460I-F RG-PA1000I-F	RG-PA600I-F RG-PA1600I-F	RG-PA600I RG-PA1600I RG-PD600I
Fan module	M05C-FAN (pre-installed 1)	M08-FAN (pre-installed 2)	M10C-FAN (pre-installed 2)
Module management port	M7805C-CM-X: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port	M7808C-CM-X: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port	M7810C-CM-X: ● 1 x RJ45 console port ● 1 x RJ45 MGMT port M7810C-FE-X I/II： ● 1 x RJ45 console port
USB	M7805C-CM-X: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)	M7808C-CM-X: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)	M7810C-CM-X: 1 x USB 2.0 port (no capacity limit, 2G/4G/8G/16G/32G capacity tested)

System specifications	RG-S7805C	RG-S7808C	RG-S7810C-X
System packet forwarding rate *3	4500 Mpps	9000 Mpps	14300 Mpps
System switching capacity *4	6000 Gbps	12000 Gbps	19200 Gbps
CPU	Supervisor module: ● M7805C-CM-X: quad-core processor, each core 2.2 GHz Line card: ● XA/XB series line card: quad-core processor, each core 2.2 GHz	Supervisor module: ● M7808C-CM-X: quad-core processor, each core 2.2 GHz Line card: ● XA/XB series line card: quad-core processor, each core 2.2 GHz	Supervisor module: ● M7810C-CM-X: quad-core processor, each core 2.2 GHz Line card: ● XA/XB series line card: quad-core processor, each core 2.2 GHz
Real-time clock (RTC)	M7805C-CM-X: supported	M7808C-CM-X: supported	M7810C-CM-X: supported
BootROM	M7805C-CM-X: 16 MB XA/XB card: 16 MB	M7808C-CM-X: 16 MB XA/XB card: 16 MB	M7810C-CM-X: 16 MB M7810C-FE-X I/II: 16 MB XA/XB card: 16 MB
Flash memory	M7805C-CM-X: 8 GB XA/XB card: 8 GB	M7808C-CM-X: 8 GB XA/XB card: 8 GB	M7810C-CM-X: 8 GB M7810C-FE-X I/II: 8 GB XA/XB card: 8 GB
Memory	M7805C-CM-X: 4 GB DDR4 XA/XB card: 4 GB DDR4	M7808C-CM-X: 4 GB DDR4 XA/XB card: 4 GB DDR4	M7810C-CM-X: 4 GB DDR4 M7810C-FE-X I: 1 GB DDR4 M7810C-FE-X II: 4 GB DDR4 XA/XB card: 4 GB DDR4
Switch buffer	XA series line card (excluding M7800C-32XS-XA): 4 MB XB series line card: 35 MB M7800C-32XS-XA: 35 MB	XA series line card (excluding M7800C-32XS-XA): 4 MB XB series line card: 35 MB M7800C-32XS-XA: 35 MB	XA series line card (excluding M7800C-32XS-XA): 4 MB XB series line card: 35 MB M7800C-32XS-XA: 35 MB

*3 means the system's packet forwarding rate.

*4 means the system's switching capacity.

Power supply and consumption	RG-S7805C	RG-S7808C	RG-S7810C-X
Power supply	2 x pluggable power modules	4 x pluggable power modules	4 x pluggable power modules
Power input	RG-PA300I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 5 A RG-PA460I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 290 V AC; 45 Hz to 63 Hz ● Maximum input current: 6 A RG-PA1000I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 10 A	RG-PA600I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 10 A RG-PA1600I-F (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 16 A	RG-PA600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz ● Maximum input current: 8 A RG-PA1600I (AC input): ● Rated input voltage: 100 V AC to 240 V AC; 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 16 A RG-PD600I (DC input): ● Rated input voltage: –48 V DC ● Maximum input voltage: –40 V DC to –75 V DC ● Maximum input current: 20 A
Maximum output power	RG-PA300I-F: 300 W RG-PA460I-F: 460 W RG-PA1000I-F: ● 100 V AC to 176 V AC: 800 W ● 176 V AC to 240 V AC: 1000 W	RG-PA600I-F: 600 W RG-PA1600I-F: ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W	RG-PA600I: 600 W RG-PA1600I: ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W RG-PD600I: 600 W
Module power consumption	M05C-FAN: < 80 W M7805C-CM-X: < 40 W	M08-FAN: < 88 W M7808C-CM-X: < 62 W M7800C-8SFG-XB: < 250 W M7800C-8SFX-XB: < 250 W	M10C-FAN: < 216 W M7810C-CM-X: < 60 W M7810C-FE-X I: < 50 W M7810C-FE-X II: < 160 W M7800C-8SFG-XB: < 250 W M7800C-8SFX-XB: < 250 W
Module power consumption	M7800C-48GT4XS-XA: < 85 W M7800C-48SFP4XS-XA: < 117 W M7800C-24GT8SFP8XS-XA: < 95 W M7800C-32XS-XA: < 149 W M7800C-52XS-XB: < 250 W M7800C-12CQ-XB: < 240 W M7800C-48XT-P-XB: < 300 W

If the PoE function is used, you need to separately configure the PoE power chassis M78-PSE-X and the power module RG-PA1600I-PL for M7800C-48XT-P-XB.

Hardware Specifications	M78-PSE-X
Fixed service port	2 x PoE out ports
Module slot	2 x power module slots
Power module	RG-PA1600I-PL
Power supply	2 x pluggable power modules
Power input	RG-PA1600I-PL (AC input): ● Rated input voltage: 100 V AC to 240 V AC, 50/60 Hz ● Maximum input voltage: 90 V AC to 264 V AC; 47 Hz to 63 Hz ● Maximum input current: 16 A
Maximum output power	RG-PA1600I-PL ● 100 V AC to 176 V AC: 1200 W ● 176 V AC to 240 V AC: 1600 W
PoE output power	Each PoE out port provides up to 1,440 W of power
Unit dimensions (W x D x H)	400.0 mm x 420.0 mm x 44.7 mm (15.75 in. x 16.54 in. x 1.76 in.)
Unit weight	5.0 kg (11.02 lbs)
Temperature	Operating temperature: 0°C to 50°C (32°F to 122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Mean time between failure (MTBF)	4,289,000 hours (about 489 years)
Power module redundancy	1+1 redundancy (same model)

Dimensions and Weight	RG-S7805C	RG-S7808C	RG-S7810C-X
Unit dimensions (W x D x H)	442 mm x 451 mm x 175 mm (17.40 in. x 17.76 in. x 6.89 in.)	442.0 mm x 465.0 mm x 441.7 mm (17.40 in. x 18.31 in. x 17.39 in.)	442.5 mm x 560.0 mm x 442.0 mm (17.42 in. x 22.05 in. x 17.40 in.)
Shipping dimensions (W x D x H)	750.0 mm x 600.0 mm x 455.0 mm (29.53 in. x 23.62 in. x 17.91 in.)	710.0 mm x 590.0 mm x 735.0 mm (27.95 in. x 23.23 in. x 28.94 in.)	845.0 mm x 685.0 mm x 770.0 mm (33.27 in. x 26.97 in. x 30.31 in.)
Rack height	4 RU	10 RU	10 RU
Unit weight	12.42 kg (27.38 lbs, empty chassis with 1 fan module)	35.6 kg (78.48 lbs, empty chassis with 2 fan modules)	43.55 kg (96.01 lbs, empty chassis with 2 fan modules)
Shipping weight	28.05 kg (61.84 lbs)	43.93 kg (96.85 lbs)	68.30 kg (150.58 lbs)

Environment and reliability	RG-S7805C	RG-S7808C	RG-S7810C-X
Temperature	Operating temperature: 0°C to 50°C (32°F to 122°F) Storage temperature: –40°C to +70°C (–40°F to +158°F)
Humidity	Operating humidity: 10% to 90% RH (non-condensing) Storage humidity: 5% to 95% RH (non-condensing)
Altitude	Operating altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
Mean time between failure (MTBF)	216,000 hours (about 24 years)	216,000 hours (about 24 years)	342,000 hours (about 39 years)
Fan	1 x pluggable fan module (pre-installed)	2 x pluggable fan modules (pre-installed)	2 x pluggable fan modules (pre-installed)
Heat dissipation	Supervisor module: right-to-left airflow Line card: right-to-rear airflow Power module: built-in fan modules drawing air outward, front-to-rear airflow	Supervisor module: right-to-rear airflow Line card: right-to-rear airflow Power module: front-to-rear airflow	Supervisor module: front-to-rear airflow Line card: side-to-rear airflow FE card: front-to-rear airflow
Acoustic noise	27°C (80.6°F): 70 dB Max Noise: 77 dB	27°C (80.6°F): 70 dB Max Noise: 77 dB	27°C (80.6°F): 70 dB Max Noise: 77 dB
Supervisor module redundancy	1+1 redundancy	1+1 redundancy	1+1 redundancy
Power module redundancy	1+1 redundancy (same model)	N+M redundancy (same model)	N+M redundancy (same model)
Fan redundancy	Not supported	1+1 redundancy	1+1 redundancy
Module hot swapping	Supported	Supported	Supported
Power module hot swapping	Supported	Supported	Supported
Fan module hot swapping	Supported	Supported	Supported
Cable hot swapping	All ports on line cards support hot swapping of cables. The switch-mode power supply supports hot swapping of power cords.
Power supply monitoring	Monitoring of the model, temperature, power, and voltage of the power supply module Power supply failure alarming Control of line card power-on based on the power status
Fan monitoring	Fan speed adjustment: 256 levels Fan failure alarming
Temperature monitoring	Over-temperature warning
ESD	ESD contact/air discharge: 6 kV/8 kV ESD susceptibility contact/air discharge: 8 kV/15 kV
Surge protection	MGMT port: 4 kV Service port: 4 kV Power port: 6 kV

Certifications and regulatory compliance	RG-S7805C	RG-S7808C	RG-S7810C-X
Safety regulation	IEC 62368-1
EMC regulation	EN 300386, EN 55032 Class A, EN 55035, EN IEC 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
RoHS	European RoHS Directive 2011/65/EU & Amendment(EU) 2015/863

Software Specifications (with -CM Series Supervisor Module)

Feature	RG-S7800C Series
Ethernet switching	Jumbo frame (maximum length: 9,216 bytes)
	802.3az EEE
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	Super-VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LLDP/LLDP-MED
IP service	Static and dynamic ARP
	DHCP client
	DHCP relay
	DHCP server
	DHCP snooping
	DNS
	DHCPv6 client, DHCPv6 relay, and DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
	Manual tunnel, automatic tunnel, and ISATAP tunnel for IPv6
	GRE tunnel
IP routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	GR
	IPv4/IPv6 IS-IS
	BGP4 and BGP4+
	EVPN
	IPv4/IPv6 VRF
	Policy-based routing (PBR)
	IPv4 and IPv6 ECMP
Multicast	IGMP v1/v2/v3
	IGMP snooping v1/v2/v3
	IGMP proxy
	IGMP fast leave
	PIM-DM, PIM-SM, and PIM-SSM
	PIM-SSM for IPv4 and IPv6
	MSDP to achieve inter-domain multicast
	MLDv1 and MLDv2
	Multicast static routing
	MLD v1/v2 snooping
	PIM-SMv6
	Multicast source IP address check Multicast source port check
MPLS	MPLS IPv6
	MPLS L3VPN
	MPLS 6VPE
	MPLS MIB (RFC 1273, RFC 4265, and RFC 4382)
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port-based rate limiting
	802.1p
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	CAR
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Eight queues on each port
Security	AAA
	RADIUS authorization and accounting
	TACACS+
	Portal authentication, RADIUS, and TACACS+ login authentication
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	Global IP-MAC binding
	ICMP
	Port security
	IP source guard
	DAI
	SAVI
	ARP spoofing prevention
	CPU Protect Policy (CPP) and NFPP
	Various attack defense functions, including NFPP and ARP anti-attack
	uRPF Login authentication and password security Unknown multicast packets are not sent to the CPU, and unknown unicast packets can be suppressed.
Reliability	Rapid Ethernet Uplink Protection (REUP)
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4 VRRP v2/v3 and IPv6 VRRP
	VRRP for the super-VLAN
	BFD
	RG-S7805C, RG-S7808C , RG-S7810C: 1+1 redundancy for supervisor modules
	RG-S7805C: 1+1 redundancy for power supply RG-S7808C , RG-S7810C: N+M redundancy for power supply
	RG-S7805C: fan redundancy is not supported RG-S7808C , RG-S7810C: 1+1 fan redundancy
	Hot swapping of components
	Hot patch and online installation of patches
	GR for OSPF/IS-IS/BGP
	BFD for VRRP/OSPF/BGP4/ISIS/ISISv6/static routing
Device virtualization	VSU
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP
	SNTP
	FTP, TFTP, and Xmodem
	SNMP v1/v2c/v3
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP
	gRPC
	OpenFlow Special 1.3 Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	Web-based NMS
	Console/Telnet/SSH2.0 CLI configuration Fault alarms and auto-recovery System operation logging
VXLAN	Layer 2 and Layer 3 VXLAN gateways

Software Specifications (with -X Series Supervisor Module)

Software Specifications	RG-S7800C-X Series
Ethernet switching	Jumbo frame (maximum length: 9,216 bytes)
	802.3az EEE
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	GVRP
	IP subnet-based VLAN
	MAC VLAN
	Port-based VLAN
	Private VLAN
	protocol-based VLAN
	Super-VLAN
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d)
	RSTP (IEEE 802.1w)
	MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LLDP/LLDP-MED
Device Virtualization	VSU
SDN	OpenFlow 1.3 NETCONF
IP service	Static and dynamic ARP
	DHCP client
	DHCP relay
	DHCP server
	DHCP snooping
	DNS
	DHCPv6 client
	DHCPv6 relay
	DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
	FTP Server
	FTP Client
	NTP server
	NTP Client
	SNTP Client
	TFTP Client
	TFTP Server
IP routing	Static routing
	BGP4
	BGP4+
	IS-ISv4
	IS-ISv6
	OSPFv2
	OSPFv3
	RIP
	RIPng
	GR
	Routing Policy
	ECMP
	IPv4/IPv6 VRF
	Policy-based routing (PBR)
Multicast	IGMP v1/v2/v3
	IGMP snooping v1/v2
	IGMP proxy
	IGMP fast leave
	PIM-DM
	PIM-SM
	PIM-SSM for IPv4 and IPv6
	MSDP to achieve inter-domain multicast
	MLDv1 and MLDv2
	Multicast static routing
	MLD v1/v2 snooping
	PIM-SMv6
	Multicast source IP address check
	Multicast source port check
MPLS	MPLS L3VPN
	MPLS 6VPE
	MPLS IPv6
	MPLS forwarding
	LDP
	LSP
VXLAN	VXLAN Layer 2 bridge
	VXLAN Layer 3 gateway
	EVPN VXLAN
ACL and QoS	Standard IP ACL
	extended IP ACL
	extended MAC ACL
	Layer 2 and Layer 3 port ACL
	VLAN ACL
	Expert-level ACL
	ACL 80
	IPv6 ACL
	Applying ACLs globally
	ACL COUNTER
	ACL LOGGING
	ACL REMARK
	802.1P
	SP
	WRR
	SP+WFR
	other queue scheduling mechanisms
	RED/WRED
	Rate limiting based on the inbound or outbound interface
	MPLS QOS
Reliability	RG-S7805C, RG-S7808C , RG-S7810C-X: 1+1 redundancy for supervisor modules
	RG-S7805C: 1+1 redundancy for power supply RG-S7808C , RG-S7810C-X: N+M redundancy for power supply
	RG-S7805C: fan redundancy is not supported RG-S7808C , RG-S7810C-X: 1+1 fan redundancy
	Hot swapping of all components
	Hot patching function for online patch upgrade
	GR
	BFD
	VRRP
	VRRP+
	Faulty optical port isolation
	Dual physical chips for boot systems
Security	NFPP
	CPP
	DAI
	port security
	IP source guard
	802.1X authentication
	MAC address-based authentication
	Portal authentication
	RADIUS
	TACACS+ login authentication
	uRPF
	SSHv2
	IPv6 SAVI
	Login authentication and password security
	providing encrypted security channels for user login
	Unknown multicast packets are not sent to the CPU, and unknown unicast packets can be suppressed.
NMS and maintenance	Console/AUX Modem/Telnet/SSH2.0 CLI configuration
	File upload and download management using FTP, TFTP, and Xmodem
	SNMP V1/V2c/V3
	RMON
	CWMP
	GRPC
	Fault alarm and auto-recovery
	System operation logging
	sFlow
	SPAN
	RSPAN
	ERSPAN
	VLAN mirroring
	Web-based NMS
Energy-Saving Design	IEEE 802.3az Energy Efficient Ethernet

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Configuration Guide

Order Information

Switch Chassis

Model	Description
RG-S7805C	RG-S7805C switch, which can accommodate three line cards and two supervisor modules (supporting -CM series and -X series supervisor modules)
RG-S7808C	RG-S7808C switch, which can accommodate six line cards and two supervisor modules (supporting -CM series and -X series supervisor modules)
RG-S7810C	RG-S7810C switch, which can accommodate eight service cards, two supervisor modules, and two switch fabric modules (supporting -CM series supervisor modules)
RG-S7810C-X	RG-S7810C-X switch, which can accommodate eight line cards, two supervisor modules, and four switch fabric modules (supporting -X series supervisor modules)

Supervisor Modules

Model	Description
M7805C-CM II	S7805C high-performance 2nd-generation supervisor module
M7808C-CM II	S7808C high-performance 2nd-generation supervisor module
M7810C-CM	S7810C high-performance 1st-generation supervisor module
M7810C-CM-F	S7810C high-performance 2nd-generation supervisor module
M7805C-CM-X	RG-S7805C high-performance supervisor module
M7808C-CM-X	RG-S7808C high-performance supervisor module
M7810C-CM-X	RG-S7810C-X high-performance supervisor module

Notes:

Different models cannot be interchanged.
Mandatory item, 1+1 redundancy supported, and at least one supervisor module must be configured.

Switch Fabric Modules

Model	Description
M7810C-FE-D I	RG-S7810C switch fabric module I
M7810C-FE-F I	RG-S7810C 2nd-generation switch fabric module
M7810C-FE-X I	RG-S7810C-X 1st-generation switch fabric module
M7810C-FE-X II	RG-S7810C-X 2nd-generation switch fabric module

Line Cards

Working with -CM series supervisor module

Model	Description
M7800C-32XS4QXS-DA	32 x 1GE/10GE SFP+ ports (LC) and 4 x 40GE QSFP+ ports (MPO), supporting splitting a 40GE port into 4 x 10GE optical ports
M7800C-24GT24SFP4XS-EB	24 x 10/100/1000BASE-T ports (RJ45), 24 x 100M/1GE SFP ports (LC) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-24SFP/12GT4XS-EB	24 x 100M/1GE SFP ports (LC), 12 x 10/100/1000BASE-T combo ports (RJ45) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-48GT4XS-EB	48 x 10/100/1000BASE-T ports (RJ45) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-48SFP4XS-EB	48 x 100M/1GE SFP ports (LC) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-48GT-FA	48 x 10/100/1000BASE-T ports (RJ45)
M7800C-48SFP-FA	48 x 100M/1GE SFP ports (LC)
M7800C-48XS-FB	48 x 1GE/10GE SFP+ ports (LC)
M7800C-8CQ-FB	8 x 40GE/100GE QSFP28 ports (LC)

Notes:

EB series line cards only interchanged with DA series line cards.
DA series line cards only interchanged with EB series line cards.
FA/FB series line cards cannot be interchanged with EB/DA series line cards.

Working with -X series supervisor module

Model	Description
M7800C-48GT4XS-XA	48 x 10/100/1000BASE-T ports (RJ45) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-48SFP4XS-XA	48 x 100M/1GE SFP ports (LC) and 4 x 1GE/10GE SFP+ ports (LC)
M7800C-24GT8SFP8XS-XA	24 x 10/100/1000BASE-T ports (RJ45), 8 x 100M/1GE SFP ports (LC) and 8 x 1GE/10GE SFP+ ports (LC)
M7800C-32XS-XA	32 x 1GE/10GE SFP+ ports (LC)
M7800C-52XS-XB	52 x 1GE/10GE SFP+ ports (LC)
M7800C-12CQ-XB	12 x 40GE/100GE QSFP28 ports (MPO/LC). One 100GE port can be split into four 25GE ports and one 40GE port can be split into four 10GE ports.
M7800C-48XT-P-XB	48 x 100/1000/2.5G/5G/10GBASE-T ports (RJ45), supporting PoE/PoE+. Each PoE port provides up to 30 W of power. The maximum power is 1440 W over 48 ports (30 W x 48). 1 x PoE in port receives PoE/PoE+ power supply. If the PoE function is used, you need to separately configure the PoE power chassis M78-PSE-X and the power module RG-PA1600I-PL for M7800C-48XT-P-XB.
M7800C-8SFG-XB	8 x SFG ports (64 x 1GE logical channels). CWDM line card for RG-S7810C-X and RG-S7808C (used with the M7808C-CM-X supervisor module)
M7800C-8SFX-XB	8 x SFX ports (64 x 10GE logical channels) with each port backward compatible with the Gigabit rate. CWDM line card for RG-S7810C-X and RG-S7808C (used with the M7808C-CM-X supervisor module)

Power Chassis and Modules

Model	Description
RG-PA300I-F	300 W AC power module, supporting redundancy, 10 A power cord, used with RG-S7805C
RG-PA460I-F	460 W AC power module, supporting redundancy, 10 A power cord, used with RG-S7805C
RG-PA600I	600 W AC power module, supporting redundancy, 10 A power cord, used with RG-S7810C & RG-S7810C-X
RG-PA600I-F	600 W AC power module, supporting redundancy, 10 A power cord, used with RG-S7808C
RG-PA1000I-F	1000 W AC power module, supporting redundancy, 10 A power cord, used with RG-S7805C
RG-PA1600I	1600 W AC power module, supporting redundancy, 16 A power cord, used with RG-S7810C & RG-S7810C-X
RG-PA1600I-F	1600 W AC power module, supporting redundancy, 16 A power cord, used with RG-S7808C
M78-PSE-X	PoE power chassis. 2 x PoE out ports can power two PoE line cards through specialized PoE cables. 2 x power module slots, used together with RG-PA1600I-PL (working with -X series supervisor module)
RG-PA1600I-PL	1600 W PoE AC power module, supporting redundancy, 16 A power cord, used with M78-PSE-X (working with -X series supervisor module)
RG-PD600I	600 W DC power module, supporting redundancy, 20 A power cord, used with RG-S7810C-X

Optical Transceivers and Cables

1GE

Model	Description
Mini-GBIC-GT	1000BASE-X to 1000BASE-T, copper SFP transceiver, RJ45, 100 m over Cat 5e/6/6a The port needs to be configured with auto-negotiation
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, 850 nm, Duplex LC, 500 m over MMF
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, 1310 nm, Duplex LC, 40 km over SMF
MINI-GBIC-ZX80-SM1550	1000BASE-ZX, SFP transceiver, 1550 nm, Duplex LC, 80 km over SMF
GE-SFP-LX20-SM1310-BIDI	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 20 km over SMF
GE-SFP-LX20-SM1550-BIDI	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 20 km over SMF
GE-SFP-LH40-SM1310-BIDI	1000BASE-LH, SFP transceiver, TX1310/RX1550, BiDi LC, 40 km over SMF
GE-SFP-LH40-SM1550-BIDI	1000BASE-LH, SFP transceiver, TX1550/RX1310, BiDi LC, 40 km over SMF
GE-SFP-LX03-SM1310-BIDI-I	1000BASE-LX, SFP transceiver, TX1310/RX1550, BiDi LC, 3 km over SMF
GE-SFP-LX03-SM1550-BIDI-I	1000BASE-LX, SFP transceiver, TX1550/RX1310, BiDi LC, 3 km over SMF

Note: BiDi transceivers must be used in pairs. If one end uses GE-SFP-LX20-SM1310-BIDI, the other end must use GE-SFP-LX20-SM1550-BIDI.

10GE

Model	Description
XG-SFP-SR-MM850	10GBASE-SR, SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF
XG-SFP-LR-SM1310	10GBASE-LR, SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF
XG-SFP-ER-SM1550	10GBASE-ER, SFP+ transceiver, 1550nm, Duplex LC, 40 km over SMF
XG-SFP-ZR-SM1550	10GBASE-ZR, SFP+ transceiver, 1550nm, Duplex LC, 80 km over SMF
XG-SFP-LR10-SM1270-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1270/RX1330, BiDi LC, 10 km over SMF
XG-SFP-LR10-SM1330-BIDI-I	10GBASE-LR, SFP+ transceiver, TX1330/RX1270, BiDi LC, 10 km over SMF
XG-SFP-AOC1M	10GBASE, SFP+ active optical cable (AOC), 1 m, including one cable and two optical transceivers
XG-SFP-AOC3M	10GBASE, SFP+ active optical cable (AOC), 3 m, including one cable and two optical transceivers
XG-SFP-AOC5M	10GBASE, SFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

Note: BiDi transceivers must be used in pairs. If one end uses XG-SFP-LR10-SM1270-BIDI-I, the other end must use XG-SFP-LR10-SM1330-BIDI-I.

40GE

Model	Description
40G-QSFP-LSR-MM850	40GBASE-LSR, QSFP+ transceiver, 850 nm, MPO 1 x 12, 400 m over OM4 MMF, 300 m over OM3 MMF
40G-QSFP-LR4-SM1310	40GBASE-LR4, QSFP+ transceiver, 1310 nm, Duplex LC, 10 km over SMF
40G-QSFP-iLR4-SM1310	40GBASE-iLR4, QSFP+ transceiver, 1310 nm, Duplex LC, 2 km over SMF
40G-QSFP-LX4-SM1310	40GBASE-LX4, QSFP+ transceiver, 1310 nm, Duplex LC, 150 m over OM3/OM4 MMF, 2 km over SMF
40G-AOC-5M	40GBASE, QSFP+ active optical cable (AOC), 5 m, including one cable and two optical transceivers

100GE

Model	Description
100G-QSFP-SR-MM850	100GBASE-SR, QSFP28 transceiver, 850 nm, MPO 1 x 12, 100 m over OM4 MMF, 70 m over OM3 MMF
100G-QSFP-LR4-SM1310	100GBASE-LR4, QSFP28 transceiver, 1310 nm, Duplex LC, 10 km over SMF
100G-AOC-10M	100GBASE, QSFP28 active optical cable (AOC), 10 m, including one cable and two optical transceivers

CWDM Transceiver

Model	Description
SFG-LR-SM	Core switch side, 1G BASE-LR,SFG Transceiver, 8 different wavelengths (10km, LC)
SFX-LR-SM	Core switch side, 10G BASE-LR, SFP+ Transceiver, 8 different wavelengths (10km, LC)

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Giáo dục

5-Star Hotel Solution

RG-S7810C 10 RU Modular Campus Core Switch

Modular Core Switch RG-S7810C

Compact chassis design with a height of 10 RU improves cabinet space utilization.
Eight line card slots support a wide range of cards that provide various port types, including 1GE, 10GE, and 40GE ports, catering to the diverse needs of small, medium, and large-scale campus deployments.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

VSU, Delivering Flexible Networking Capabilities and High Performance

VSU technology virtualizes multiple physical switches into one logical unit with a single IP address to realize unified management, simplifying O&M.
Fast link failover within 50 to 200 milliseconds ensures nonstop transmission of critical services.

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

SOE Management Software INC Offers Easy and Efficient O&M

Hardware Specifications (with -CM Series Supervisor Module)

Hardware Specifications (with -X Series Supervisor Module)

Software Specifications (with -CM Series Supervisor Module)

Software Specifications (with -X Series Supervisor Module)

Switch Chassis

Supervisor Modules

Switch Fabric Modules

Line Cards

Working with -CM series supervisor module

Working with -X series supervisor module

Power Chassis and Modules

Optical Transceivers and Cables

1GE

10GE

40GE

100GE

CWDM Transceiver

2024 Ruijie Networks Brand Awareness Survey

Giáo dục

5-Star Hotel Solution

RG-S7810C 10 RU Modular Campus Core Switch

Modular Core Switch RG-S7810C

Compact chassis design with a height of 10 RU improves cabinet space utilization.Eight line card slots support a wide range of cards that provide various port types, including 1GE, 10GE, and 40GE ports, catering to the diverse needs of small, medium, and large-scale campus deployments.

Security Defense Policies, Ensuring Network Robustness

CPP

NFPP

VSU, Delivering Flexible Networking Capabilities and High Performance

VSU technology virtualizes multiple physical switches into one logical unit with a single IP address to realize unified management, simplifying O&M.Fast link failover within 50 to 200 milliseconds ensures nonstop transmission of critical services.

Hardware-Level Multi-Protection, Delivering Carrier-Grade Reliability

SOE Management Software INC Offers Easy and Efficient O&M

Hardware Specifications (with -CM Series Supervisor Module)

Hardware Specifications (with -X Series Supervisor Module)

Software Specifications (with -CM Series Supervisor Module)

Software Specifications (with -X Series Supervisor Module)

Switch Chassis

Supervisor Modules

Switch Fabric Modules

Line Cards

Working with -CM series supervisor module

Working with -X series supervisor module

Power Chassis and Modules

Optical Transceivers and Cables

1GE

10GE

40GE

100GE

CWDM Transceiver

2024 Ruijie Networks Brand Awareness Survey

Compact chassis design with a height of 10 RU improves cabinet space utilization.
Eight line card slots support a wide range of cards that provide various port types, including 1GE, 10GE, and 40GE ports, catering to the diverse needs of small, medium, and large-scale campus deployments.

VSU technology virtualizes multiple physical switches into one logical unit with a single IP address to realize unified management, simplifying O&M.
Fast link failover within 50 to 200 milliseconds ensures nonstop transmission of critical services.